High Speed Contactless Cards Read and Write Card Machine Full-Automation

Write card parameters
1,          Support to change the sector cipher
2,          Write data to the specified sector
3,          Read the code
4,          Test card printing data,ensuring the consistency  of the data  with the database,Prevent wrong writing
5,          Test  electrical properties  of ID cards
Support type of card: CPU card for Type protocol in line with ISO14443 standard ,mifare Std4k,mifare UltraLight,S50 ,S70Card defects can be detected as follows:
detection of surface scratch, laminated watermark, air spot, bubble, printing color difference, oil stain, punching error (black edge), unclear printing, ghosting, watermark, etc.
check the position and overall dimension of card logo, UnionPay mark, visa mark, magnetic stripe, signature strip, holographic mark, etc.
if you need to detect miniature graphics or invisible anti-counterfeiting graphics, you can add corresponding detection stations.
Technical parameters
Requirements for operating environment of the machine:
1. Operating ambient temperature: 5-40 ºC 2. Relative humidity: 15-90% 3. Storage ambient temperature: - 10-60 ºC
Air source used:
1. Required air pressure: 0.45-1mpa
2. Gas volume available: not less than 20L / min
3. There shall be a plug-in pipe near the installation site of the machine( Φ 8) The straight-line distance between the position of the connector and the machine shall not be greater than 3.5m
Electrical requirements:
1. Electrical grounding resistance: < 10 Ω
2. Power supply: 220V ± 10%, 48 ~ 62Hz
3. The system uses 220V standard AC power supply and must have a reliable third protective grounding (PE)
4. The power of the whole machine is about 1.6kw, and the power supply needs to use an independent power socket - use a standard three core power socket, which is not more than 1.5m away from the machine, and the allowable current of the socket and line is more than 10A
The appearance dimension, card issuing and receiving parts can be lengthened or shortened according to customer requirements
Host: 2540 (L) * 710 (H) * 1500 (H)
Card issuing part: 1400 (L) * 710 (H) * 1500 (H)
Card receiving part: 1400 (L) * 710 (H) * 1500 (H)